MT-A310H is your ideal half-cut knife-holder choice for heavy material. Thanks to its robust design, it guarantees a steady slitting downforce than MT-A310 knife-holder in heavier and thicker material range of its versatility. With its depth adjustment of 14mm stroke and precision blade roundness of up to +/-0.005mm, it adapts to slit only the upper layer cut off/non-cut through at lower layer and also reduces blade wear out for life-time extending. The MT-A310H is ideally suited to a wide range of heavier material applications like medical adhesive tapes, foam tapes, and protection film.
Model MT-A310H-BSK30
Min. slit width 30mm
Max. slit speed 100M/min(1)
Down-stroke 0~14mm
Air Pressure 3~6/kg/cm²
Blade O.D. Ø76.2mm
Guide-bar GB02/GB04/GB05
Feature Rigidity knife holder
Precision depth adjustment
Half-cut effective
Equipped high precision blade(+/-0.005mm)
Blade lifetime extended
Suitable Various Papers >>> kraft paper, silicone paper, releasing paper, decoration
wallpaper, masking paper, adhesive paper, thick paper
board, corrugated carton paper, sandpaper.
Various Plastic films >>> flexible laminated films, soft & rigid PVC films, BOPP,
PET, PE, PS, LDPE, PLA, SBS, various adhesive tape.
Cloth & fabrics >>> non-woven cloth, synthetic leather, natural cotton, mesh
cloth, medical cloth, label cloth...etc.
Foams >>> PSP foams,PE foams..etc
Drawing
(1) The maximum slitting speed is according to the actual materials, thickness and slitting results.
Each blade will undergo special precision grinding and control of each blade's roundness to reach +/-0.005mm before the product leaves our factory. The precision blade with fine grinding hardness backing roller and through A310/A310H half-cut knife holder depth adjusting allows you to cut as depth as you want.
GB05 is the new generation of the Guide-Bar series. It has the advantage of the linear guideway groove, side-fixed installation, lightweight, and fast delivery. Besides, there are two lengths of guide-bar to choose from, 2000mm and 2400mm.
The 130 teeth zigzag blade is made of tool steel (SKD-11) imported from Europe, processed by well heat treatment to increase its mechanical properties such as toughness and wear resistance. The blade tip is precisely ground to maintain an equal tooth pitch and peak, the slitting edge will generate the zigzag notch, to facilitate tearing along the notch. The zigzag blade is suitable for easy-tear applications such as medical tapes.
Bearings for score blade, there are two different model , 697ZZ is for 5.0mm thickness and 17mm inner diameter score blade ; 6900RS is for 6.2mm thickness and 22mm inner diameter.